custom stock gear types & sizes:spur, helical, spiral bevel gears

Products >> Stock Gears

Gear Types and Sizes

Arrow Gear stocks 51 different sets of lapped spiral bevel gears in ratios of 1:1, 2:1, 3:1, 3:2 and 4:3. In addition, we stock 8 different sets of ground tooth spiral bevel gears in ratios of 1:1 and 2:1. Should you be unable to satisfy your gear requirements from the selection of stock gears listed in our catalog, check our non-stock gears or please contact us for assistance. We can modify most of our stock gears to your specifications.

Custom Gears
In addition to the stock and non-stock gears listed in our catalog we manufacture custom spiral bevel gears, hypoid gears, Zerol® bevel gears, Coniflex® bevel gears, helical gears and spur gears, as well as Curvic® couplings to customers' prints and specifications. Please refer to the following chart for the complete range of gear sizes and capabilities.

RANGE SIZE AND CAPABILITIES
Type of Gear	Maximum Pitch Diameter	Diametral Pitch	Face Width	Unground Tooth	Ground Tooth
Spiral Bevel	30"	1.5 - 48	5.0	AGMA 9*	AGMA 13
Zerol® Bevel	22"	1.5 - 48	4.0	AGMA 9*	AGMA 13
Coniflex® Bevel	28"	2.5 - 48	6.0	AGMA 9*	-
Helical	20"	3.0 - 48	13.0	AGMA 9	AGMA 13
Internal Spur	14.5"	3.6 - 48	8.0	AGMA 9	AGMA 13
Internal Spline	14.5"	3.6 - 48	8.0	AGMA 9	AGMA 13
Spur Gear	20"	3.0 - 48	13.0	AGMA 9	AGMA 13
Spline Gear	20"	4/8 - 80/160	13.0	AGMA 9	AGMA 13

*Some Configurations to AGMA Quality Number 10 (lapped).

This information is on page 3 of our Stock Gear Catalog.
Click HERE to download a PDF version of that page.

Need more information? Use our Quick Question Form

Home | Company Overview | Gear Manufacturing Capabilities | Products | Publications