 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Overview > Sizes
Sizes | Tooth Cutting | Tooth Grinding | Heat Treat | Isotropic Superfinishing | Other Machining | Design
Sizes
Arrow is equipped for a full range of machining capabilities to meet customer needs. The following table outlines our gear range sizes and capabilities. For more information on our machining capabilities, please review to our Equipment Section (PDF).
|
Type of Gear |
Max. Pitch Diameter | Diametral Pitch | Face Width | Unground Tooth | Ground Tooth |
| Spiral Bevel | 30" | 1.5 - 48 | 5.0 | AGMA 9* | AGMA 13 |
| Zerol® Bevel | 22" | 1.5 - 28 | 4.0 | AGMA 9* | AGMA 13 |
| Coniflex® Bevel | 28" | 2.5 - 48 | 6.0 | AGMA 9* | --- |
| Helical | 36" | 3.0 - 48 | 13.0 | AGMA 9 | AGMA 13 |
| Internal Spur/Spline | 32" | 3.6 - 48 | 8.0 | AGMA 9 | AGMA 13 |
| Spur | 36" | 3.0 - 48 | 13.0 | AGMA 9 | AGMA 13 |
| Spline | 36" | 4/8 - 80/160 | 13.0 | AGMA 9 | AGMA 13 |
 |
 |
 |
 |
 |
 |
| Spiral Bevel | Zerol® Bevel | Coniflex® Bevel | Helical | Spur | Curvic® Coupling |
* Some Configuration to AGMA Quality Number 10 (Lapped)